Saturday, June 28, 2014

Guide in Purchasing Steel Handicap Ramps

If you have a family member who uses wheelchair at home, it is of importance and love that you build him/her a ramp that would be comfortable to use. This will not only be used by him/her but so with other family members. This is why you have to make sure that it will not pose danger to any of your family member.

Whether you are a first time buyer or planning to change your steel handicap ramps at home, here is a guide to help you choose and explore your choices.

Who needs the steel handicap ramps and where will these be situated?

Surely you are purchasing the ramps because somebody needs it. But as mentioned earlier, it is not only needed by one family member but all of the family member might be using it as well. Sometimes, even those who used a wheelchair for a long time will need someone to support and push the wheelchair in coming out or going inside the house.

Ask yourself where you will be putting it up. There could be more than two entrances in your home, so choose which one is the most comfortable. In some instances, you might need to install it in all the entries such as back entry, in your garage or the front door. You might also need to install one for the bathroom and don’t forget the threshold for your vehicle. See, there’s a lot to consider so this might take some time for you. If you are just replacing an old ramp, you still have to check it out.
What kind of ramps will you get?

There are basically three common materials used in making ramps -the aluminum, steel or wooden ramps. Steel Handicap Ramps or aluminum ramps can be a better choice if you want to spend at least once and if you want them to last long. However, if the budget is not enough, then wood ramps will still be a good choice.
How long will your ramps need to be?

You might overlook this part. You have to measure the areas where you will be putting this up. Of course there will be an ascending part, that’s what you have to measure as well.
How wide will your ramp be?

First thing is to check the width of the base of the wheelchair but it does not mean to say that you will exact it. You have to provide allowance, enough allowance to avoid spending again in case you need to change it. You’ll have to do the same for the vehicle ramp.
What type should it be?

Number one thing you need to see is the safety of everyone using it. Choosing a ramp which is non-slippery and one that will not accumulate water will be your first consideration. Check the quality of the material and see to it that it will be installed by experts.

If you have many more questions, you are always free to visit steel handicap ramps, aluminum and wooden ramp stores near you. Doing it will give you all the information needed, you will see it with your own eyes and you will also be able to compare prices.

No comments:

Post a Comment